Mechanochemical Approach to Obtaining a Multicomponent Fisetin Delivery System Improving Its Solubility and Biological Activity.

In this study, binary amorphous solid dispersions (ASDs, fisetin-Eudragit®) and ternary amorphous solid inclusions (ASIs, fisetin-Eudragit®-HP-ß-cyclodextrin) of fisetin (FIS) were prepared by the mechanochemical method without solvent. The amorphous nature of FIS in ASDs and ASIs was confirmed using XRPD (X-ray powder diffraction). DSC (Differential scanning calorimetry) confirmed full miscibility of multicomponent delivery systems. FT-IR (Fourier-transform infrared analysis) confirmed interactions that stabilize FIS's amorphous state and identified the functional groups involved. The study culminated in evaluating the impact of amorphization on water solubility and conducting in vitro antioxidant assays: 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)-ABTS, 2,2-diphenyl-1-picrylhydrazyl-DPPH, Cupric Reducing Antioxidant Capacity-CUPRAC, and Ferric Reducing Antioxidant Power-FRAP and in vitro neuroprotective assays: inhibition of acetylcholinesterase-AChE and butyrylcholinesterase-BChE. In addition, molecular docking allowed for the determination of possible bonds and interactions between FIS and the mentioned above enzymes. The best preparation turned out to be ASI_30_EPO (ASD fisetin-Eudragit® containing 30% FIS in combination with HP-ß-cyclodextrin), which showed an improvement in apparent solubility (126.5 ± 0.1 µg∙mL-1) and antioxidant properties (ABTS: IC50 = 10.25 µg∙mL-1, DPPH: IC50 = 27.69 µg∙mL-1, CUPRAC: IC0.5 = 9.52 µg∙mL-1, FRAP: IC0.5 = 8.56 µg∙mL-1) and neuroprotective properties (inhibition AChE: 39.91%, and BChE: 42.62%).

Carvacrol nanocapsules as a new antifungal strategy: Characterization and evaluation against fungi important for grape quality and to control the synthesis of ochratoxins.

Fungi are a problem for viticulture as they can lead to deterioration of grapes and mycotoxins production. Despite the widespread use of synthetic fungicides to control fungi, their impact on the agricultural ecosystem and human health demand safer and eco-friendly alternatives. This study aimed to produce, characterize and assess the antifungal activity of carvacrol loaded in nanocapsules of Eudragit® and chia mucilage as strategy for controlling Botrytis cinerea, Aspergillus flavus, Aspergillus carbonarius, and Aspergillus niger. Eudragit® and chia mucilage were suitable wall materials, as both favored the encapsulation of carvacrol into nanometric diameter particles. Fourier Transform Infrared Spectroscopy (FTIR) analysis suggested a successful incorporation of carvacrol into both nanocapsules, which was confirmed by presenting a good encapsulation efficiency and loading capacity. Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) analyses revealed adequate thermal resistance. All fungi were sensible to carvacrol treatments and B. cinerea was the most sensitive compared to the Aspergillus species. Lower concentrations of encapsulated carvacrol than the unencapsulated form were required to inhibit fungi in the in vitro and grape assays. Additionally, lower levels of carvacrol (unencapsulated or encapsulated) were used to inhibit fungal growth and ochratoxin synthesis on undamaged grapes in comparison to those superficially damaged, highlighting the importance of management practices designed to preserve berry integrity during cultivation, storage or commercialization. When sublethal doses of carvacrol were used, the growth of A. niger and A. carbonarius was suppressed by at least 45 %, and ochratoxins were not found. The nanoencapsulation of carvacrol using Eudragit® and chia mucilage has proven to be an alternative to mitigate the problems with fungi and mycotoxins faced by the grape and wine sector.

Eudragit S100 coated nanodiamond-based nanoparticles as an oral chemo-photothermal delivery system for local treatment of colon cancer.

Oral colonic nano-drug delivery system has received more and more attention in the treatment of colon cancer due to local precision treatment and reduction of drug system distribution. However, the complex and harsh gastrointestinal environment and the retention of nanoparticles in the colon limit its development. To this end, we designed Eudragit S100 (ES) coated nanoparticles (ES@PND-PEG-TPP/DOX). Polydopamine coated nanodiamond (PND) was modified with amino-functionalized polyethylene glycol (NH2-PEG-NH2) and triphenylphosphine (TPP) successively. Due to the high specific surface area of PND, it can efficiently load the model drug doxorubicin hydrochloride (DOX). In addition, PND also has high photothermal conversion efficiency, generating heat to kill cancer cells under near infrared (NIR) laser, realizing the combination of chemotherapy and photothermal therapy (CT-PTT). TPP modification enhanced nanoparticle uptake by colon cancer cells and prolonged preparations retention time at the colon. ES shell protected the drug from being destroyed and prevented the nanoparticles from sticking to the small intestine. Ex vitro fluorescence imaging showed that TPP modification can enhance the residence time of nanoparticles in the colon. In vivo pharmacodynamics demonstrated that CT-PTT group has the greatest inhibitory effect on tumor growth, which means that the nanocarrier has potential clinical value in the in-situ treatment of colon cancer.

Formulation, Characterization and In Vitro Evaluation of Mesalamine and Bifidobacterium bifidum Loaded Hydrogel Beads in Capsule System for Colon Targeted Delivery.

Mesalamine is a first-line drug for the treatment of inflammatory bowel diseases. However, its premature release associated with marketed formulations leads to adverse effects like gastric trouble, vomiting, and diarrhoea. To minimize these side effects, colon-targeted drug delivery is essential. Besides conventional pharmacotherapy, bifidogenic probiotics with anti-inflammatory activity has been reported to elicit a significant impact on the remission of ulcerative colitis. Bifidogenic probiotics being acid-labile necessitate developing a gastro-resistant formulation for enhancing the delivery of viable cells to the colon. The present study was aimed at developing a fixed-dose unit dosage form of mucoadhesive hydrogel beads loaded with mesalamine and Bifidobacterium bifidum further encapsulated in Eudragit® capsules for the targeted drug delivery at colonic pH. The hydrogel beads were prepared by ionotropic gelation, with the effect of single and dual-crosslinking approaches on various formulation characteristics studied. Standard size 00 Eudragit® gastro-resistant capsules were prepared and the dried beads were filled inside the capsule shells. The formulation was then evaluated for various parameters, including physicochemical characterization, in vitro biocompatibility and anti-inflammatory activity. No interaction was observed between the drug and the polymers, as confirmed through FTIR, XRD, and DSC analysis. The mean particle size of the beads was ~ 457-485 µm. The optimized formulation showed a drug entrapment efficiency of 95.4 ± 2.58%. The Eudragit® capsule shells disintegrated in approximately 13 min at pH 7.4. The mucoadhesive hydrogel beads sustained the drug release above 18 h, with 50% of the drug released by the end of 12 h. The optimized formulation demonstrated significant (p < 0.05) gastro-resistance, biocompatibility, sustained drug release, cell viability, and anti-inflammatory activity.

Validation of a human saliva model for the determination of leachable monomers and other chemicals from dental materials.

This study aimed to prove the validity of a mixture of chemicals, including salts, small organic molecules, mucin, and α-amylase, as saliva surrogate ("artificial saliva") for assessing leakage of methacrylate monomers and other constituents from dental materials. To achieve this, we developed and validated a liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the quantification of 2-hydroxyethyl methacrylate (HEMA), triethylene glycol dimethacrylate (TEGDMA), diurethane dimethacrylate (UDMA), bisphenol A glycerolate dimethacrylate (BisGMA), diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), bisphenol A (BPA), and five homologues of ethoxylated bisphenol A dimethacrylate (BisEMA EO2-6) in unstimulated and artificial saliva, and compared their concentrations in the two saliva media following either spiking with a mixture of the compounds or incubation of test specimens of printed biomaterials. Test specimens were immersed in unstimulated/artificial saliva, incubated at 37 °C for 24 h, and saliva aliquots were extracted with methanol and subsequently analyzed by LC-MS/MS. The method was validated with regard to matrix effects, linearity, selectivity, lower limits of quantification (LLOQ), precision, bias and combined measurement uncertainty (u'). The performance characteristics of the method were comparable for unstimulated and artificial saliva samples. The combined u' for individual chemicals at a concentration of 10 × LLOQ were within the range of 5.3-14 % for unstimulated saliva and 6.9-16 % for artificial saliva, except for the BisEMA homologues. Combined u' for the latter were 27-74 % in unstimulated saliva, and 27-79 % in artificial saliva. There was no detectable release of BPA from the test specimens, and the TPO concentrations were mainly below the LLOQ. TEGDMA and UDMA were detected in the highest quantities, and at comparable concentrations in the unstimulated and artificial saliva. For all BisEMA homologues, the release was higher in unstimulated saliva than in artificial saliva. The study showed that the artificial saliva model can be a suitable replacement for native saliva, but might underestimate leakage of more lipophilic methacrylates.

On the gamma radiation response of commercially available 3D printing materials for medical dosimetry.

3D printing technology has rapidly spread for decades, allowing the fabrication of medical implants and human phantoms and revolutionizing healthcare. The objective of this study is to evaluate some radiological properties of commercially available 3D printing materials as potential tissue mimicking materials. Among fifteen materials, we compared their properties with nine human tissues. In all materials and tissues, exposure and energy absorption buildup factors were calculated for photon energies between 0.015 and 15 MeV and penetration depths up to 40 mean free path. Furthermore, the Geant4 Monte Carlo toolkit (version 10.5) was used to simulate their percentage depth dose distributions. In addition, equivalent atomic numbers, effective atomic numbers, attenuation coefficients, and CT numbers have been examined. All parameters were considered in calculating the average relative error (σ), which was used as a statistical comparison tool. With σ between 6 and 7, we found that Polylactic Acid (PLA) was capable of simulating eye lenses, blood, soft tissue, lung, muscle, and brain tissues. Moreover, Polymethacrylic Acid (PMAA) material has a σ value of 4 when modeling adipose and breast tissues, respectively. Aside from that, variations in 3D printing materials' infilling percentage can affect their CT numbers. We therefore suggest the PLA for mimicking soft tissue, muscle, brain, eye lens, lung and blood tissues, with an infill of between 92.7 and 94.3 percent. We also suggest an 89 percent infill when simulating breast tissue. Furthermore, with a 96.7 percent infill, the PMAA faithfully replicates adipose tissue. Additionally, we found that a 59 percent infill of Fe-PLA material is comparable to cortical bone. Due to the benefits of creating individualized medical phantoms and equipment, the results might be seen as an added value for both patients and clinicians.

Melatonin protects TEGDMA-induced preodontoblast mitochondrial apoptosis via the JNK/MAPK signaling pathway.

Resin monomer-induced dental pulp injury presents a pathology related to mitochondrial dysfunction. Melatonin has been regarded as a strong mitochondrial protective bioactive compound from the pineal gland. However, it remains unknown whether melatonin can prevent dental pulp from resin monomer-induced injury. The aim of this study is to investigate the effects of melatonin on apoptosis of mouse preodontoblast cells (mDPC6T) induced by triethylene glycol dimethacrylate (TEGDMA), a major component in dental resin, and to determine whether the JNK/MAPK signaling pathway mediates the protective effect of melatonin. A well-established TEGDMA-induced mDPC6T apoptosis model is adopted to investigate the preventive function of melatonin by detecting cell viability, apoptosis rate, expressions of apoptosis-related proteins, mitochondrial ROS (mtROS) production, mitochondrial membrane potential (MMP) and adenosine triphosphate (ATP) level. Inhibitors of MAPKs are used to explore which pathway is involved in TEGDMA-induced apoptosis. Finally, the role of the JNK/MAPK pathway is verified using JNK agonists and antagonists. Our results show that melatonin attenuates TEGDMA-induced mDPC6T apoptosis by reducing mtROS production and rescuing MMP and ATP levels. Furthermore, mitochondrial dysfunction and apoptosis are alleviated only by the JNK/MAPK inhibitor SP600125 but not by other MAPK inhibitors. Additionally, melatonin downregulates the expression of phosphorylated JNK and counteractes the activating effects of anisomycin on the JNK/MAPK pathway, mimicking the effects of SP600125. Our findings demonstrate that melatonin protects mDPC6T cells against TEGDMA-induced apoptosis partly through JNK/MAPK and the maintenance of mitochondrial function, offering a novel therapeutic strategy for the prevention of resin monomer-induced dental pulp injury.

Synthesis of a novel monomer "DDTU-IDI" for the development of low-shrinkage dental resin composites.

OBJECTIVE: The current dental resin composites often suffer from polymerization shrinkage, which can lead to microleakage and potentially result in recurring tooth decay. This study presents the synthesis of a novel monomer, (3,9-diethyl-1,5,7,11-tetraoxaspiro[5,5]undecane-3,9-diyl)bis(methylene) bis((2-(3-(prop-1-en-2-yl)phenyl)propan-2-yl)carbamate) (DDTU-IDI), and evaluates its effect in the formulation of low-shrinkage dental resin composites. METHODS: DDTU-IDI was synthesized through a two-step reaction route, with the initial synthesis of the required raw material monomer 3,9-diethyl-3,9-dihydroxymethyl-1,5,7,11-tetraoxaspiro-[5,5] undecane (DDTU). The structures were confirmed using Fourier-transform infrared (FT-IR) spectroscopy and hydrogen nuclear magnetic resonance (1HNMR) spectroscopy. Subsequently, DDTU-IDI was incorporated into Bis-GMA-based composites at varying weight percentages (5, 10, 15, and 20 wt%). The polymerization reaction, degree of conversion, polymerization shrinkage, mechanical properties, physicochemical properties and biocompatibility of the low-shrinkage composites were thoroughly evaluated. Furthermore, the mechanical properties were assessed after a thermal cycling test with 10,000 cycles to determine the stability. RESULTS: The addition of DDTU-IDI at 10, 15, and 20 wt% significantly reduced the polymerization volumetric shrinkage of the experimental resin composites, without compromising the degree of conversion, mechanical and physicochemical properties. Remarkably, at a monomer content of 20 wt%, the polymerization shrinkage was reduced to 1.83 ± 0.53%. Composites containing 10, 15, and 20 wt% DDTU-IDI exhibited lower water sorption and higher contact angle. Following thermal cycling, the composites exhibited no significant decrease in mechanical properties, except for the flexural properties. SIGNIFICANCE: DDTU-IDI has favorable potential as a component which could produce volume expansion and increase rigidity in the development of low-shrinkage dental resin composites. The development of low-shrinkage composites containing DDTU-IDI appears to be a promising strategy for reducing polymerization shrinkage, thereby potentially enhancing the longevity of dental restorations.

Factors influencing baby boomers' intention to choose a dish featuring plant-based meat alternatives (PBMA) at a restaurant: Findings from an online panel study.

The purpose of this study is to examine the psychosocial determinants of baby boomers'-born between 1946 and 1964- intention to choose a menu item featuring plant-based meat alternatives (PBMA) when dining out. The specific objectives are as follows: 1) to identify the baby boomer generation's health-related perceptions about PBMA, and 2) to examine the factors that influence baby boomers' intention to choose a dish featuring PBMA at a restaurant. A total of 174 responses obtained using the Qualtrics panel were analyzed with content analysis and partial least squares structural equation modeling (PLS-SEM). The findings identified various underlying perceptions of baby boomers toward PBMA, such as perceived health outcomes, perceived availability, and willingness to purchase. Furthermore, subjective norm, cues to action, and self-identity were found to be significant predictors of the intention to choose a menu item featuring PBMA when dining out. Theoretical and practical implications are discussed.

Evaluation of the amount of residual monomer released from different flowable composite resins.

Today, resin materials are used in the restoration of permanent and deciduous teeth or as fissure sealants. The materials can contain different types of monomers (Bis-GMA, UDMA, TEGDMA). These monomers can be released into the oral cavity after polymerization. Residual monomers released from resin-containing restorative materials after polymerization have been reported to have negative effects on mechanical properties. The aim of our study is to evaluate the amount of residual monomers released after polymerization of different flowable composite resin materials using two different modes of LED light source. Composite disc samples (8 mm diameter/2 mm depth) prepared for each material group were polymerized using two different modes of the LED light device (Standard mode and extra power mode). HPLC (High Performance Liquid Chromatography) device was used to measure the amount of residual monomer release at 1 h, 1 day, 3 days and 7 days periods. Pairwise comparison of the differences between the materials was performed by Post-hoc test. For each residual monomer, the Kruskal Wallis test was used to analyze the difference between the materials in standard mode and the difference between the materials in extra power mode. According to the results of the study; Grandio flow flowable composite showed the highest release of TEGDMA and Bis-GMA while SDR® Flow flowable composite showed the lowest release of TEGDMA, Bis-GMA and UDMA. For all materials, the extra power mode resulted in more residual monomer release. TEGDMA and Bis-GMA release was detected in all tested flowable composites at all time periods.

Formulation and optimization of a single-layer coat for targeting budesonide pellets to the descending Colon.

The current budesonide formulations are inadequate for addressing left-sided colitis, and patients might hesitate to use an enema for a prolonged time. This study focuses on developing a single-layer coating for budesonide pellets targeting the descending colon. Pellets containing budesonide (1.5%w/w), PVP K30 (5%w/w), lactose monohydrate (25%w/w) and Avicel pH 102 (68.5%w/w) were prepared using extrusion spheronization technique. Coating formulations were designed using response surface methodology with pH and time-dependent Eudragits. Dissolution tests were conducted at different pH levels (1.2, 6.5, 6.8, and 7.2). Optimal coating formulation, considering coating level and the Eudragit (S + L) ratio to the total coating weight, was determined. Budesonide pellets were coated with the optimized composition and subjected to continuous dissolution testing simulating the gastrointestinal tract. The coating, with 48% S, 12% L, and 40% RS at a 10% coating level, demonstrated superior budesonide delivery to the descending colon. Coated pellets had a spherical shape with a uniform 30 µm thickness coating, exhibiting pH and time-dependent release. Notably, zero-order release kinetics was observed for the last 9 h in colonic conditions. The study suggests that an optimized single-layer coating, incorporating pH and time-dependent polymers, holds promise for consistently delivering budesonide to the descending colon.

Nanoemulsions and nanocapsules loaded with Melaleuca alternifolia essential oil for sepsis treatment.

Sepsis represents a complex clinical syndrome that results from a harmful host response to infection. The infections most associated with sepsis are pneumonia, intra-abdominal infection, and urinary tract infection. Tea tree oil (TTO) has shown high antibacterial activity; however, it exhibits low aqueous solubility and high volatility, which have motivated its nanoencapsulation. In this study, the performance of nanoemulsions (NE) and nanocapsules (NC) loaded with TTO was compared. These systems were prepared by spontaneous emulsification and nanoprecipitation methods, respectively. Poly-ε-caprolactone or Eudragit® RS100 were tested as polymers for NCs whereas Tween® 80 or Pluronic® F68 as surfactants in NE preparation. Pluronic® F68 and Eudragit® RS100 resulted in more homogeneous and stable nanoparticles. In accelerated stability studies at 4 and 25 °C, both colloidal suspensions (NC and NE) were kinetically stable. NCs showed to be more stable to photodegradation and less cytotoxic than NEs. After sepsis induction by the cecal ligation and puncture (CLP) model, both NE and NC reduced neutrophil infiltration into peritoneal lavage (PL) and kidneys. Moreover, the systems increased group thiols in the kidney and lung tissue and reduced bacterial growth in PL. Taken together, both systems showed to be effective against injury induced by sepsis; however, NCs should be prioritized due to advantages in terms of cytotoxicity and physicochemical stability.

The impact of replacing milk with plant-based alternatives on iodine intake: a dietary modelling study.

PURPOSE: Cow's milk is the primary source of iodine in the UK, but consumption of plant-based milk alternatives (PBMA) is increasing and these products are often not fortified with iodine. We evaluated the impact that replacing current milk consumption with PBMA would have on iodine intake. METHODS: We used data from the National Diet and Nutrition Survey (2016-2019) for children (1.5-10 years), girls 11-18 years, and women of reproductive age (WRA). We used a dietary modelling approach with scenarios using brand-level iodine-fortification data (0, 13, 22.5, 27.4 and 45 µg/100 mL). Relative to usual diet, we calculated change in iodine intake, and the proportion with intake below the Lower Reference Nutrient Intake (LRNI) or above the upper limit. RESULTS: For all groups, replacement with PBMA, either unfortified or fortified at the lowest concentration, resulted in a meaningful decrease in iodine intake, and increased the proportion with intake < LRNI; compared to usual diet, iodine intake reduced by 58% in children 1.5-3 years (127 vs. 53 µg/day) and the proportion with intake < LRNI increased in girls (11-18 years; 20% to 48%) and WRA (13% to 33%) if an unfortified PBMA was used. Replacement of milk with PBMA fortified at 27.4 µg/100 mL had the lowest impact. CONCLUSION: Replacing milk with commercially available PBMAs has potential to reduce population iodine intake, depending on the fortification level. PBMAs fortified with ≥ 22.5 and < 45 µg iodine/100 mL would be required to minimize the impact on iodine intake. Research is needed on the impact of total dairy replacement.

Facial on-line enrichment of glycoproteins by capillary electrophoresis with boronate-functionalized poly(glycidyl methacrylate) microparticles coated column.

A facial and rapid method for glycoproteins enrichment by capillary electrophoresis was developed. The 3-aminophenylboronic acid-functionalized poly(glycidyl methacrylate) microparticles (PGMA@APBA) were attached to the capillary inlet (length of ∼1.5 cm) by electrostatic self-assemble action to prepare a partially coated capillary column. The process is simple and reversible, allowing for easy renewal of the PGMA@APBA coating when its enrichment efficiency decreases. By utilizing the coated column, glycoproteins can be enriched within 2 min. The column exhibits a specific enrichment for glycoproteins and can be consecutively used for approximately 60 runs. The relative standard deviations (RSDs) of peak area of run-to-run (n = 5) and batch-to-batch (n = 3) were 1.5 % and 1.0%, respectively. The method was successfully applied to enrich glycoproteins from 1 × 1012-fold diluted real egg white sample, indicating its practical applicability.

Co-immobilized multi-enzyme biocatalytic system on reversible and soluble carrier for saccharification of corn straw cellulose.

Herein, three enzymes (cellulase, ß-glucosidase, and pectinase) with synergistic effects were co-immobilized on the Eudragit L-100, and the recovery of co-immobilized enzymes from solid substrates were achieved through the reversible and soluble property of the carrier. The optimization of enzyme ratio overcomed the problem of inappropriate enzyme activity ratio caused by different immobilization efficiencies among enzymes during the preparation process of co-immobilized enzymes. The co-immobilized enzymes were utilized to catalytically hydrolyze cellulose from corn straw into glucose, achieving a cellulose conversion rate of 74.45% under conditions optimized for their enzymatic characteristics and hydrolytic reaction conditions. As a result of the reversibility and solubility of the carrier, the co-immobilized enzymes were recovered from the solid substrate after five cycles, retaining 54.67% of the enzyme activity. The aim of this study is to investigate the potential of co-immobilizing multiple enzymes onto the Eudragit L-100 carrier for the synergistic degradation of straw cellulose.

Preparation of Block Copolymer Self-Assemblies via Pisa in a Non-Polar Medium Based on RCMP.

Polymerization-induced self-assembly (PISA) is conducted in a non-polar medium (n-dodecane) via reversible complexation-mediated polymerization (RCMP). Stearyl methacrylate (SMA) is used to synthesize a macroinitiator, and subsequent block polymerization of benzyl methacrylate (BzMA) from the macroinitiator in n-dodecane afforded a PSMA-PBzMA block copolymer, where PSMA is poly(stearyl methacrylate) and PBzMA is poly(benzyl methacrylate). Because PSMA is soluble but PBzMA is insoluble in n-dodecane, the block copolymer formed a self-assembly during the block polymerization (PISA). Spherical micelles, worms, and vesicles are obtained, depending on the degrees of polymerization of PSMA and PBzMA. "One-pot" PISA is also attained; namely, BzMA is directly added to the reaction mixture of the macroinitiator synthesis, and PISA is conducted in the same pot without purification of the macroinitiator. The spherical micelle and vesicle structures are also fixed using a crosslinkable monomer during PISA. RCMP-PISA is highly attractive as it is odorless and metal-free. The "one-pot" synthesis does not require the purification of the macroinitiator. RCMP-PISA can provide a practical approach to synthesize self-assemblies in non-polar media.

Synthesis and characterisation of microcapsules for self-healing dental resin composites.

AIM: The purpose of this study was to i) synthesise TEGDMA-DHEPT microcapsules in a laboratory setting; ii) characterise the resultant microcapsules for quality measures. MATERIALS & METHODS: Microcapsules were prepared by in situ polymerization of PUF shells. Microcapsules characterisation include size analysis, optical and SEM microscopy to measure the diameter and analyse the morphology of PUF microcapsules. FT-IR spectrometer evaluated microcapsules and benzyl peroxide catalyst polymerization independently. RESULT: Average diameter of TEGDMA-DHEPT microcapsules was 120 ± 45 µm (n: 100). SEM imaging of the capsular shell revealed a smooth outer surface with deposits of PUF nanoparticles that facilitate resin matrix retention to the microcapsules upon composite fracture. FT-IR spectra showed that microcapsules crushed with BPO catalyst had degree of conversion reached to 60.3%. CONCLUSION: TEGDMA-DHEPT microcapsules were synthesised according to the selected parameters. The synthesised microcapsules have a self-healing potential when embedded into dental resin composite as will be demonstrated in our future work.

Co-emulsified Alginate-Eudragit Nanoparticles: Potential Carriers for Localized and Time-defined Release of Tenofovir in the Female Genital Tract.

This research aimed to explore the possibilities of Eudragit S100 (ES100) and sodium alginate as carriers for tenofovir disoproxil fumarate (TDF) in the female genital tract. Alginate and alginate-ES100 nanoparticles were prepared using the ionic gelation and emulsion/gelation complexation method, respectively. The nanocarriers were tested using morphological, physicochemical, in vitro drug release, and cytotoxicity analyses. In SEM and TEM images, the presence of spherical and uniformly distributed nanoparticles was revealed. The FTIR spectrum showed that alginate and calcium chloride interacted due to ionic bonds linking divalent calcium ions and the -COO- of alginate groups. Alginate and ES100 interacted via the ester C=O amide stretching. The results obtained from XRD and DSC, on the other hand, revealed a favorable interaction between sodium alginate and ES100 polymers, as evidenced by the crystallization peaks observed. Under experimental design analysis and optimization, overall size distribution profiles ranged from 134.9 to 228.0 nm, while zeta potential results showed stable nanoparticles (-17.8 to -38.4 MV). The optimal formulation exhibited a maximum cumulative in vitro release of 72% (pH 4.2) up to 96 h. The cytotoxicity tests revealed the safety of TDF-loaded nanoparticles on vaginal epithelial cells at concentrations of 0.025 mg/mL, 0.5 mg/mL, and 1 mg/mL for 72 h. These results indicated that alginate-ES100 nanoparticles have the potential to preserve and sustain the release of the TDF drug in the FGT. The future goal is to develop a low-dose non-toxic microbicide that can be administered long term in the vagina to cater to both pregnant and non-pregnant HIV patients.

Methylene blue removal using modified poly(glycidyl methacrylate) as a low-cost sorbent in batch mode: kinetic and equilibrium studies.

Industrial textile wastewater contains large amounts of cationic dye material. Therefore, a new adsorbent was synthesized as modified poly(glycidyl methacrylate) (mPGMA) with a fluorine group-containing compound 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP). mPGMA was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectrometer (FTIR). The proposed adsorbent has been used to remove methylene blue (MB) from aqueous solutions by the adsorption process. In further experiments, the removal efficiency of adsorbent in both powder (˂600 µm) and granular form was compared from aqueous solutions by adsorption process. Furthermore, the effects of changing parameters such as adsorbent dosage, contact time, pH, temperature, and initial dye concentration on methylene blue adsorption were investigated. Also, Langmuir, Freundlich, and Temkin isotherms have been used to describe the equilibrium characteristics of adsorption. Finally, the experimental data fitted well by Langmuir isotherm with a maximum adsorption capacity of 17.5 mg g-1. The experimental data were applied to pseudo-first- and second-order models. The experimental results were better fitted for the pseudo-second-order model than the other model. Consequently, the experimental results showed that mPGMA is a suitable low-cost adsorbent with great potential benefit in removing methylene blue from aqueous solutions.

Solvent-free method for masking the bitter taste of azithromycin dihydrate using supercritical fluid technology.

INTRODUCTION AND PURPOSE: The unpleasant extremely bitter taste of the orally administered broad-spectrum antibiotic azithromycin decreases patient compliance, especially in pediatrics. This issue can be overcome by decreasing drug interaction with the tasting buds using insoluble polymers at salivary pH (6.8 - 7.4), like the cationic polymer Eudragit EPO. Supercritical fluid technology is a green synthesis method for preparing pharmaceutical preparations that replace organic solvents with safe supercritical CO2. This study aimed to mask the bitter taste of azithromycin using the supercritical fluid method and a pH-sensitive Eudragit EPO polymer. METHODS: A foaming process was investigated for preparing a formulation (TEST), which comprises treating the polymer with supercritical carbon dioxide (CO2) fluid to prepare a taste-masked dosage form without employing organic solvents or flavors. RESULTS: The use of the supercritical technique at 40 °C and 10 MPa for 2 h allowed the manufacturing of solvent-free polymeric foam with azithromycin dispersions; the average calculated percentage of apparent volume change was 62.5 ± 5.9% with an average pore diameter of 34.879 Å. The formulated sample showed low drug release in simulated salivary fluid while keeping its crystalline nature. Moreover, clinical studies on healthy subjects showed that the formula successfully masked azithromycin's bitter taste. CONCLUSIONS: Overall, it has been shown herein that the supercritical fluid technology foaming method is promising in masking the bitter taste of bitter ingredients.